Call Us 24/7

+91-8591096714

Send Us Mail

sales@perfectengineersindia.com

Established

In the year 1988

Get a Quote

Home > Product > Ball Valve > Based on Operation > Electric Actuated Ball Valves

Electric Actuated Ball Valves – Smart Control for Industrial Flow Automation

Upgrade your fluid control system with the power of automation. Electric Actuated Ball Valves by Perfect Engineers are designed for precise, remote, and programmable shut-off of liquids and gases. Whether you’re building a PLC/SCADA-based system or need hands-free operation in your industrial setup, our electric ball valves deliver efficient flow control, long cycle life, and zero manual intervention.

Table of Contents

Send Enquiry whatsapp
Electric-Actuated-Ball-Valves-scaled

What is an Electric Actuated Ball Valve?

An Electric Actuated Ball Valve is a ball valve fitted with an electric motor actuator that automatically opens or closes the valve using electrical signals—usually from a PLC, timer, switch, sensor, or control panel.

Ideal for:

  • Remote shut-off or flow switching
  • Timed automation sequences
  • Emergency isolation with battery backup
  • Modulating control of flow rate (using 4–20mA)

Key Features of Our Electric Ball Valves

  1. Available in ON/OFF and Modulating (0–100%) versions
  2. Voltage Options: 12VDC, 24VDC, 110VAC, 220VAC, 415VAC
  3. Built-in manual override gear
  4. ISO 5211 direct mount actuator with visual indicator
  5. Optional features: limit switches, heater, torque limiter
  6. Offered in SS304, SS316, Brass, WCB, CPVC
  7. Sizes: ½” to 12” | Pressure: Up to PN100 / Class 600

Technical Specifications

ParameterSpecification
Size Range½” to 12”
Body MaterialSS304, SS316, WCB, Brass, PVC
End ConnectionsThreaded, Flanged, Socket Weld, Clamp
Seat OptionsPTFE, RPTFE, Metal Seated, Graphite
Voltage Supply12V/24V DC, 110V/220V/415V AC
Actuation Time5–15 seconds (depending on torque/size)
Actuator EnclosureIP65 / IP67 / Flameproof / ATEX (optional)
Torque Output10Nm to 300Nm+
Control OptionsDigital ON/OFF / Analog 4–20mA / Modbus

Modulating vs ON/OFF Control

FeatureON/OFF TypeModulating Type
OperationFully open or closedAny angle (0–100% stroke)
Best ForTank shut-off, valve isolationFlow control, pressure regulation
Signal Type2-wire/3-wire control4–20 mA or 0–10V input
FeedbackOpen/Close limit switchesContinuous position feedback

Contact Us for Pricing & OEM Support

Call

+91-8591096714

E-mail

sales@perfectengineersindia.com

Website

www.perfectqrc.com

Applications of Electric Ball Valves

  1. Water and wastewater automation
  2. Paint and chemical batching skids
  3. HVAC chilled/hot water loops
  4. RO & DM water control in pharma
  5. Remote tank drain/fill applications
  6. Food and beverage blending lines
  7. PLC/SCADA-driven process systems
  8. Steam and boiler water isolation (graphite seated)

Automation Accessories We Offer

  • Limit switch box (open/close status)
  • Positioner for analog modulation
  • Solenoid valve (for signal-based trigger)
  • Manual override handwheel
  • IP67/Flameproof enclosure
  • Battery backup for fail-safe shut-off
  • Heater/thermostat for cold climates

Installation & Setup Tips

  • Ensure correct voltage and wiring polarity
  • Mount valve so actuator is accessible for override
  • Allow enough time delay in PLC to avoid short cycling
  • Check actuator torque vs valve size before selection
  • Ground actuator to avoid electrical noise issues

FAQs

Typical actuation time is 5–15 seconds, depending on size and torque.

Use a battery backup or fail-safe actuator for critical systems.

Yes—modulating valves with 4–20mA or 0–10V input provide accurate flow control.

Our actuators integrate with PLC, DCS, SCADA, and smart sensors.

Ready to Connect Faster, Safer, Smarter?

Explore Configurations, Compare Materials, and Get Prices Fast
We serve purchase heads, OEMs, and end-users with tailored Electric Actuated Ball Valves – Smart Control for Industrial Flow Automation recommendations and commercial pricing.
Request a Quote Now