Home > Product > Ball Valve > Based on Operation > Electric Actuated Ball Valves
Upgrade your fluid control system with the power of automation. Electric Actuated Ball Valves by Perfect Engineers are designed for precise, remote, and programmable shut-off of liquids and gases. Whether you’re building a PLC/SCADA-based system or need hands-free operation in your industrial setup, our electric ball valves deliver efficient flow control, long cycle life, and zero manual intervention.
An Electric Actuated Ball Valve is a ball valve fitted with an electric motor actuator that automatically opens or closes the valve using electrical signals—usually from a PLC, timer, switch, sensor, or control panel.
Ideal for:
| Parameter | Specification |
|---|---|
| Size Range | ½” to 12” |
| Body Material | SS304, SS316, WCB, Brass, PVC |
| End Connections | Threaded, Flanged, Socket Weld, Clamp |
| Seat Options | PTFE, RPTFE, Metal Seated, Graphite |
| Voltage Supply | 12V/24V DC, 110V/220V/415V AC |
| Actuation Time | 5–15 seconds (depending on torque/size) |
| Actuator Enclosure | IP65 / IP67 / Flameproof / ATEX (optional) |
| Torque Output | 10Nm to 300Nm+ |
| Control Options | Digital ON/OFF / Analog 4–20mA / Modbus |
| Feature | ON/OFF Type | Modulating Type |
|---|---|---|
| Operation | Fully open or closed | Any angle (0–100% stroke) |
| Best For | Tank shut-off, valve isolation | Flow control, pressure regulation |
| Signal Type | 2-wire/3-wire control | 4–20 mA or 0–10V input |
| Feedback | Open/Close limit switches | Continuous position feedback |
+91-9004860491
www.perfectqrc.com
Typical actuation time is 5–15 seconds, depending on size and torque.
Use a battery backup or fail-safe actuator for critical systems.
Yes—modulating valves with 4–20mA or 0–10V input provide accurate flow control.
Our actuators integrate with PLC, DCS, SCADA, and smart sensors.
Copyrights © 2025 Perfect Engineers. All rights reserved. Developed & Managed by AdinAds